New holland tx32 concave removal Please help...

[eomachinery]

Hi all can anyone can anyone guide us in the right dircetion of how to take the concave out of our tx32, we have trunken off, all bolts out etc. but its being held in by the de - awning plate handles, is there an easy way to remove them? many thanks

 

[balerman]

From memory,aren’t they held on with roll pins,knock them out pull handles off.

 

[Nearly]

@Two Tone ?

 

[Alwaysinit]

I think from memory the handles are held on with roll pins- knock them out, then disconnect the rods with the 10mm bolt in below the concave from the de-awning plates.