NH COMBINE SENSOR

[Hollykip]

I believe I have a faulty sensor on the grain tank lids
Cannot access road mode just tells me grain tank not closed when it is
Is it a genuine nh part or anybody sought other suppliers ?
Model CR 9070 elevation 09 reg
TIA

 

[del_boy]

Had the same sensor play up to days ago. Kept telling me the lid was shut. A quick clean off on the end of the sensor and made sure it was making contact to the metal plate cured mine.

 

[Hollykip]

Thanks
Mines opposite telling me it’s open when it isn’t
So stops me using rode mode switch
Thanks

 

[del_boy]

Have exact same combine as you, cutting rape at the mo, getting a dirty sample while turning around on the ends, the sieves seem to open up when the header is lifted up letting chaff into the tank, do you get this problem?

 

[Hollykip]

Have you switched the headland mode off that opens sieves at end ?

 

[kc6475]

Have exact same combine as you, cutting rape at the mo, getting a dirty sample while turning around on the ends, the sieves seem to open up when the header is lifted up letting chaff into the tank, do you get this problem?[/QUOTE
In auto header mode when you pick the header up it activates a headland routine on my cx, make sure it's turned off to not change any settings as you turn round.

 

[del_boy]

Have you switched the headland mode off that opens sieves at end ?

Yeah I've done that on the acs settings. Its bloody annoying as in small fields with lots of turning its worse