NH intelliview 3 help

[Mean Green]

Does anyone know how to get it to coverage log?

We've asked a few people and most say you need the swath map menu, but we've looked where everyone says it should be and can't find it. Is it possible someone could of delete it as it was a demo tractor before my neighbour bought it? Or are we looking for the wrong thing?

Any help appreciated.
Matt

 

[Robt]

Tried dealer that sold it to your neighbour?

 

[Mean Green]

Tried that. As per nobody seems to know anything about the finer details of them, so I thought I'd ask on here.

 

[Robt]

Ok fair enough, just thought it fair you asked them first.

 

[oval]

Did u get the book which should come with screen which tells u all about guidance

 

[Mean Green]

Yes they have a manual in the tractor. It also says in the manual about this swath map but as I say it's not there?? That's why we wondered if it could of possibly been deleted?

 

[Wheatseeker]

Does anyone know how to get it to coverage log?

We've asked a few people and most say you need the swath map menu, but we've looked where everyone says it should be and can't find it. Is it possible someone could of delete it as it was a demo tractor before my neighbour bought it? Or are we looking for the wrong thing?

Any help appreciated.
Matt[/QUOTE

All the run screens are configurable. If you go to Toolbox, layout ( I think or something similar) select the run screen number you want to add it to and select from the list. Also select the number of boxes per page, which may just be one for a swath map.

 

[GPS_Support_2014]

It is possible to configure two types of Maps:
- Map
- Swath Map

For both Toolbox > GPS needs to be enabled.
And additionally, for Swath Map,Toolbox > NAV needs to be enabled.

If you don't see the NAV tab then you're missing the Autoguidance software which the dealer will need to install.

Once you have those enabled, goto Toolbox>Layout and search for Map(2x5) or Swath Map (2x5). Select it to assign it to one of the Run screens.

 

[nznewholland]

The display interface level needs to be set to advanced in Toolbox/-Display Tab, you will also need a memory stick, to record data.