NH T7.200 replacement with more power?

[Chippy]

A while back I started a topic on my new T7.200 auto command because I wasn't getting the hang of it and it's been 2000 hours and none of the staff nor me have really got the hang of it. It has a mind of its own has that gearbox. I'm wanting to do a straight swap for a power command but I'd like a bit more power and weight without getting physically too big for my buildings so what model is there that's more powerful but not much bigger? Whichever model I decide on I plan to have a go with for 2nd cut.

 

[jack6480]

Puma 160

 

[Fergieman]

T7 210 Power Command. Anything with more power will be physicaly bigger which answers your more weight problem.

 

[sputnik]

A while back I started a topic on my new T7.200 auto command because I wasn't getting the hang of it and it's been 2000 hours and none of the staff nor me have really got the hang of it. It has a mind of its own has that gearbox. I'm wanting to do a straight swap for a power command but I'd like a bit more power and weight without getting physically too big for my buildings so what model is there that's more powerful but not much bigger? Whichever model I decide on I plan to have a go with for 2nd cut.

T7.225 is the biggest you can get in swb line up. There T4final machines and probably expensive compared to t4a T7.210

 

[Chae1]

Have you chipped it? Friend has a chipped one and runs mf 190 square baler and trailed amazon drill.

 

[bluegreen]

I think the T7.225 is vario gearbox only.

 

[sputnik]

I think the T7.225 is vario gearbox only.View attachment 359864

T7.270 only cvt / autocommand. All swb are available with range power or Autocommand

 

[Chippy]

Not chipped it but was tempted. It's still in warranty which is what's put me off. I could always get another t7.200 but chip it and just hope nothing goes bang.

 

[Mur Huwcun]

Have you operated a Power Command? It's far from a 'nice' gearbox to use!!!!

 

[benferg]

Had the same dramas with a t.200 ac. In the end they did a deal to get me out of it. We have two T7.250's and I like them. Would not buy a smaller chassis auto command with the 2 speed box. The bigger 4 speed ones are fine. Have a t7050 with 6000 hours on it and really like it

 

[Chippy]

Have you operated a Power Command? It's far from a 'nice' gearbox to use!!!!

Not had a go with one but I'm going to before we swap it. Might have to get a JD 6175R at same time. Got finance left on the T7.200 though so could get complicated if I'm changing make as well.

 

[Chae1]

Not had a go with one but I'm going to before we swap it. Might have to get a JD 6175R at same time. Got finance left on the T7.200 though so could get complicated if I'm changing make as well.

6175 M looks like a good tractor.

 

[NZ Tech]

Or a 6195m....

 

[Chippy]

Does the M come with the direct gearbox?

 

[fieldfarmer]

T7.270 only cvt / autocommand. All swb are available with range power or Autocommand

T7.225 only come's with the autocomand box , 210 is the biggest that they will put a powercomand in , however the 210 will feel more powerful of a tractor imi.

 

[dazza b]

T7.225 only come's with the autocomand box , 210 is the biggest that they will put a powercomand in , however the 210 will feel more powerful of a tractor imi.

We have a t7.235 with power command I think you're confused

 

[Chippy]

http://m.agriaffaires.co.uk/used/farm-tractor/10563136/new-holland-t7-235-pc.html

 

[Chippy]

T7.225 only come's with the autocomand box , 210 is the biggest that they will put a powercomand in , however the 210 will feel more powerful of a tractor imi.

To be fair I can't find a single 225 with anything other than an auto command box so your half right

 

[michael N123]

Remap it

 

[AgriTuner]

Yes remap it, but use Derv Doctor, he has partner in Cumbria. With AC you can go wrong if the remap is done with shortcuts, it just won't pull well and drinks too much.