Pottinger plough bodies

[3legs]

Hi,

I am looking at a pottinger 35 servo plough its got 46Wd boards on it, can anyone tell me what these boards are? and what ground they are suited too and depth? currently run a pottinger with 36W boards, some metal is the same a kverneland.

Regards
Kevin

 

[farmerjimz]

Hi,

I am looking at a pottinger 35 servo plough its got 46Wd boards on it, can anyone tell me what these boards are? and what ground they are suited too and depth? currently run a pottinger with 36W boards, some metal is the same a kverneland.

Regards
Kevin

I would really like to know too

 

[Gav]

The 46Wd/46Wc are low draft bodies suitable for all soil types. Can be used at higher speeds and for wide furrow widths at depths of up to 35cm. They also leave a wide furrow bottom allowing larger tyres to fit.

 

[farmerjimz]

The 46Wd/46Wc are low draft bodies suitable for all soil types. Can be used at higher speeds and for wide furrow widths at depths of up to 35cm. They also leave a wide furrow bottom allowing larger tyres to fit.

Thanks for the reply

Isnt the 36w equilevant to kverneland no.28

I have 710 tyres thats why i am asking

Thanks in advance

 

[Gav]

Thanks for the reply

Isnt the 36w equilevant to kverneland no.28

I have 710 tyres thats why i am asking

Thanks in advance

The 46Wc/Wd gives the widest furrow bottom for larger tyres, 4-5” wider than the 36W.

On paper the 46Wc/Wd would match the Kverneland no.28 body more closely than the 36W.