Prattley Weigher

[polk_farmer]

Has anybody put panel reader on a prattley manual weigh crate, and if so would they be kind enough to put up any pictures?TIA

 

[Jop]

Have got a tru test panel on ours, not a very clear photo but hope you can see it’s mounted on the rear panel and on the outside of the crate. It works okay but some times need to push them back if the tag doesn’t read as they come in. Hope this helps.

 

[polk_farmer]

Have got a tru test panel on ours, not a very clear photo but hope you can see it’s mounted on the rear panel and on the outside of the crate. It works okay but some times need to push them back if the tag doesn’t read as they come in. Hope this helps.

Nice thanks, so you just put it on the outside of the green panel and it reads through it?

 

[Jop]

Nice thanks, so you just put it on the outside of the green panel and it reads through it?

Nope sorry just had a closer look and it is mounted on the inside of the weigh crate but where the wire goes into the antennae is on the outside if that makes sense!

 

[polk_farmer]

Nope sorry just had a closer look and it is mounted on the inside of the weigh crate but where the wire goes into the antennae is on the outside if that makes sense!

yea I get you, panel on the inside, and then a hole through the side of the weigher for cabling

 

[polk_farmer]

@Jop what make is your panel reader? Thanks

 

[Jop]

@Jop what make is your panel reader? Thanks

Trutest, is probably ten years old now so don’t know if they have changed the designs or anything by now.