Pressure washer quick fit connectors.

[Nearly]

Hi, looking to extend my hose on a regular basis. I have NiTo 6500 DK connectors on one hose, has anyone a tame supplier for these or am I better going with another type. About 5 male and 5 female ends required.

Have I to just knock the middle out of hyd couplers?

Cheers

 

[davidroberts30]

Why knock the middle out?
Pressure washer flow is less than half hydraulic

 

[Boohoo]

I used 3/8 hydraulic fittings with the centre knocked out. They've started to rust and are a pain to separate if left connected when not in use

 

[Nearly]

Why knock the middle out?
Pressure washer flow is less than half hydraulic

I used 3/8 hydraulic fittings with the centre knocked out. They've started to rust and are a pain to separate if left connected when not in use

Less to rust.

 

[chickens and wheat]

karcher type m22 are reasonable, you need a joining nipple however, if you buy new hose just buy with m22 fittings already pressed on

i use https://www.malcleanse.co.uk/advanced_search_result.html?page=3&keyword=m22&search_in_description=1

 

[jack_c]

Bought a new Erhle pressure washer recently from Kew Cleaning equipment and came with genuine Nilfisk couplers on it, seem much better than the generic of the same style I've had before.

Same as these, if you can get a stainless steel male end it helps too.

https://northwestpowerwashers.co.uk/product/nilfisk-alto-high-pressure-coupling-set-101119499/