Hello
I have NH t7060 AC
The problem is like that:
Start the tractor after 15 sec appear the 5003 error, then it s dissable the pto.
If i start the tractor and imediate engage the pto before that 15 sec (befor appear the 5003 error) will work fine. If i disengage the pto and start again will work, if i disengage the pto after 15 sec appear again, and then i cannt engage it.
3 days i work with the tractor like that. I have to let the pto engaged all the time. It s hard working like that.
Today i apply 12v direct on solenoid and it s work, but when i apply 12v the pto start very very fast ( agressiv), and then i took down the solenoid i clean it and put it in his place and same 5003 error.
I check the wires that enter the solenoid and i have 13.70 v when i engage the pto. I think the voltage is ok, but after the 5003 erorr appear all the pto buttons don t work.
It s possible to be the electric part of the solenoid???
I have NH t7060 AC
The problem is like that:
Start the tractor after 15 sec appear the 5003 error, then it s dissable the pto.
If i start the tractor and imediate engage the pto before that 15 sec (befor appear the 5003 error) will work fine. If i disengage the pto and start again will work, if i disengage the pto after 15 sec appear again, and then i cannt engage it.
3 days i work with the tractor like that. I have to let the pto engaged all the time. It s hard working like that.
Today i apply 12v direct on solenoid and it s work, but when i apply 12v the pto start very very fast ( agressiv), and then i took down the solenoid i clean it and put it in his place and same 5003 error.
I check the wires that enter the solenoid and i have 13.70 v when i engage the pto. I think the voltage is ok, but after the 5003 erorr appear all the pto buttons don t work.
It s possible to be the electric part of the solenoid???
