PTO Soil Auger Tips

[Fruitbat]

Right,
Anyone know where to get new replacement tips for this p.t.o. driven auger?
Alternatively does anyone make augers with 4 bolt mounting at 8cm centres?
This machine has been floating around for years but it's got to the stage where it's wearing the soil away rather than drilling and clearing. Mainly used in tilled ground, clay loam + the odd brick so nothing too heavy duty, although I am going down 1.2m for orchard posts....
Many thanks,
FB

 

[Stock]

McConnel ones maybe....................Failing that break out the welder and stellite rods....................

 

[solo]

Agrilinc do borer parts but they are different to your style. Maybe cut and weld?

 

[Fruitbat]

Thanks,
Agrilinc ones look close, I'll cut off the remains of the current ones and get a better idea on hole spacing/pattern.

 

[Dave W]

Crikey. The address in the first pic is about 200yds from my house.
Not that that’s any help whatsoever. Never heard of them

 

[Pheasant Surprise]

I’ve got “Digga” auger drive. Maybe see if their wearing parts could fit or be adapted...

http://www.diggaeurope.com/wear-parts.php

 

[Fruitbat]

Crikey. The address in the first pic is about 200yds from my house.
Not that that’s any help whatsoever. Never heard of them

Well if you've got 10 mins to wander down the road....!

I think they're long gone, this thread is leaning heavily towards the vintage machinery section.
It's annoying, I've got a range of augers of different bores and lengths but none have decent tips on anymore.