Rear Floatation wheels for tx66 combine

[will_mck]

Hello. My tx66 came with 16.0/70-20 (405/70-20) rear wheels and on my kinda land they were sinking a bit last harvest. I'd like to change these for a set as close as possible to double this width. The height of the wheel is roughly 41" (1040mm). Has anyone any suggestions what I could replace these with, ideally I'd like something around 700mm but can't go much taller, maybe there'd be terra type tires to suit? 550's I still don't think would be wide enough for my job

 

[Donkey Oaty]

It would be worth trying Manners Combine parts.

 

[Chae1]

We use 710 flotations off our fastrac.

Had to get adaptor plates made. They make a big difference though. Only put them on when gets really wet.

 

[will_mck]

Are those 710/40r22.5's? Would you know what height those wheels are? Would they not leave the combine a good bit higher at the back? I was thinking about a set of those if they would work

 

[Chae1]

Are those 710/40r22.5's? Would you know what height those wheels are? Would they not leave the combine a good bit higher at the back? I was thinking about a set of those if they would work

I'll have a look when I'm out tomorrow. Definitely not higher. If anything I'd say lower.

 

[ORRA LOON]

We had a set that were fairly wide but still the same height, sold them to @KennyO , maybe he still has them.

 

[Chae1]

We had a set that were fairly wide but still the same height, sold them to @KennyO , maybe he still has them.

Have you still got fastrac flotations on digger!?

 

[ORRA LOON]

nah it’s been so dry this year that we are back on the standards. Put some new hybrid tyres on the Fastrac yesterday though.

 

[KennyO]

We had a set that were fairly wide but still the same height, sold them to @KennyO , maybe he still has them.

Sold them with the combine.

Biggest difference we made was taking the chopper off when it was wet last year.

4wd is the dogs balloxx now though.

 

[glasshouse]

Hello. My tx66 came with 16.0/70-20 (405/70-20) rear wheels and on my kinda land they were sinking a bit last harvest. I'd like to change these for a set as close as possible to double this width. The height of the wheel is roughly 41" (1040mm). Has anyone any suggestions what I could replace these with, ideally I'd like something around 700mm but can't go much taller, maybe there'd be terra type tires to suit? 550's I still don't think would be wide enough for my job

Hello. My tx66 came with 16.0/70-20 (405/70-20) rear wheels and on my kinda land they were sinking a bit last harvest. I'd like to change these for a set as close as possible to double this width. The height of the wheel is roughly 41" (1040mm). Has anyone any suggestions what I could replace these with, ideally I'd like something around 700mm but can't go much taller, maybe there'd be terra type tires to suit? 550's I still don't think would be wide enough for my job

Hello. My tx66 came with 16.0/70-20 (405/70-20) rear wheels and on my kinda land they were sinking a bit last harvest. I'd like to change these for a set as close as possible to double this width. The height of the wheel is roughly 41" (1040mm). Has anyone any suggestions what I could replace these with, ideally I'd like something around 700mm but can't go much taller, maybe there'd be terra type tires to suit? 550's I still don't think would be wide enough for my job

Where?

 

[will_mck]

Where?

Northern Ireland

 

[glasshouse]

Northern Ireland

Pm sent

 

[jackstor]

We put 600/40 22.5 on ours, made a big difference