Reca UK tools

[sjt01]

Has anyone experience of these? We had the local rep round yesterday, undercut our previous cutting disk suppliers by about 20%, tried the disks and seem OK. Also tried then ordered some drill bits for Hardox and stainless. Tried one against our standard bits, went through Hardox in less than half the time.

 

[aidan]

Has anyone experience of these? We had the local rep round yesterday, undercut our previous cutting disk suppliers by about 20%, tried the disks and seem OK. Also tried then ordered some drill bits for Hardox and stainless. Tried one against our standard bits, went through Hardox in less than half the time.

the drill is new so its sharp, your old one is blunt is the explanation. I wonder how long it will remain sharp

 

[sjt01]

the drill is new so its sharp, your old one is blunt is the explanation. I wonder how long it will remain sharp

It was a new sharp drill from our stock

 

[TJC agricultural]

I've been using Reca products for 3 years and the cutting disks are really good value when bought on the deal with a free Bosch grinder 100 disks and grinder for £110
I've always used Dormer drill bits and never had any cause for complaint but I never really drill any Hardox I always plasma cut or if lots of holes are required get it Lazer cut.