1594mac
Member
- Location
- Northern Ireland
Good evening now for today's question/issue, I went to sow some fertiliser today and turned switch for PTO, the light illuminated and PTO was turning. After a while I noticed the light was flashing as the PTO stopped!!!! Which was a bit of a pain. I turned the switch as best I could and off I went again and OFF it went AGAIN!!!!!
Nursed it until I had emptied the sower and now I seek the pointers to sort this problem my thoughts immediately is then PTO switch which doesn't seem to be precise if you know what I mean it rotates quite a bit. Oil in rear checked and was up to level. Now when the PTO goes OFF the indicator light on the dash remains flashing! Any thoughts please.
Nursed it until I had emptied the sower and now I seek the pointers to sort this problem my thoughts immediately is then PTO switch which doesn't seem to be precise if you know what I mean it rotates quite a bit. Oil in rear checked and was up to level. Now when the PTO goes OFF the indicator light on the dash remains flashing! Any thoughts please.