Hi all
A problem with my Ceres pto ,a handle on the right side od cabine od for engage pr disengage pto,on the left side is pto speed,540,540 Eco,and neutral.
Yesterday i was working,put the speed on 540,starter the pto,everything fine,then when i wanted to stop it,on the right handle it wouldnt disengage the pto?
I had to stop it on the speed handle,put it on neutral.
After that i couldnt start pto again,had to turn off the machine,put the pto on speed ,and then start machine with pto on.
After about na hour working,the right handle,for pto on-off,was again working,but pto didnt stop immedaitly,it was like slowly stoping to turn,weird.
What could be the problem?
Any advice is welcoming.
Ty
A problem with my Ceres pto ,a handle on the right side od cabine od for engage pr disengage pto,on the left side is pto speed,540,540 Eco,and neutral.
Yesterday i was working,put the speed on 540,starter the pto,everything fine,then when i wanted to stop it,on the right handle it wouldnt disengage the pto?
I had to stop it on the speed handle,put it on neutral.
After that i couldnt start pto again,had to turn off the machine,put the pto on speed ,and then start machine with pto on.
After about na hour working,the right handle,for pto on-off,was again working,but pto didnt stop immedaitly,it was like slowly stoping to turn,weird.
What could be the problem?
Any advice is welcoming.
Ty
