Resurfacing rubber rollers

[Monty]

Hi guys. Has anybody sent a rubber roller off for reconditioning? I've removed the roller from our round baler since it's covered it cut marks from a stanley knife and net wraps round it every fifth bale or so since I knackered it. The cost of new is ridiculous so looking for a cheaper alternative

 

[Will 1594]

b h leake birmingham area
do rubber rollers

 

[sjt01]

Hi guys. Has anybody sent a rubber roller off for reconditioning? I've removed the roller from our round baler since it's covered it cut marks from a stanley knife and net wraps round it every fifth bale or so since I knackered it. The cost of new is ridiculous so looking for a cheaper alternative

I have resurfaced rotary lobe pump impellers with this https://uk.rs-online.com/web/p/fillers-putties/0692867

 

[Hesstondriver]

Clifton Rubber | Manufacturers of Rubber and Polyurethane components since 1973

A leading UK Manufacturer of Rubber and Polyurethane Components across a range of different industries. Established in 1973.

cliftonrubber.com

give these a call

 

[JLLM]

Spaldings used to do tubes of repair compound which worked ok but BH Leake are pretty good.

 

[twizz]

I took 1 to bh leake to do 1 it was done in a week I think. Good service

 

[stev]

Clifton rubber waterbeach Cambridge?
Do a good job of recons/ part ex’s!

 

[Netherfield]

Nelson Roller & Rubber Co. Ltd

www.nelsonroller.co.uk

 

[Bob lincs]

Clifton rubber waterbeach Cambridge?
Do a good job of recons/ part ex’s!

Clifton rubber did a good job of rebuilding our JD 8000t idler wheels , loads better than the replacements from JD that we’re oval

 

[stev]

Ive had dolman rollers for a reekie spud picker from them absolutely fantastic

 

[gm69]

Another vote for Clifton rubber check out there web site

 

[PSQ]

I have resurfaced rotary lobe pump impellers with this https://uk.rs-online.com/web/p/fillers-putties/0692867
View attachment 1027648

It’s good stuff, but read the safety instructions on the tin. If that doesn’t give you a heart attack then the £70 price tag for 500ml will.

 

[ridger]

Spaldings used to do tubes of repair compound which worked ok but BH Leake are pretty good.

I tried it once, but it wouldn't set. Was still like black water a week later

 

[PostHarvest]

I'd rate having a specialist doing the job over a tin of do it yourself rubber paste every time. Having seen it done, the specialist companies spin the roller in a lathe whilst sanding off the surface with a linishing belt. This makes sure that the finished roller is perfectly round. If it isn't perfect, you will have problems.

 

[Monty]

Cheers guys. In the end we took it to BH Leake. It looks like they have done an excellent job

 

[mobileweld]

Unsure where it goes to be done, but ours get done via Polar bearings. They collect when they deliver bearings ect and bring back in a week or so.
Good service from them use them a lot