Roller shutter door instillation recommendations North Yorkshire
- Thread starter benny6910
- Start date
Charlie M
Member
- Location
- North Yorkshire
Emmerson doors, done 9 at ours and never an issue.
rob h
Member
- Location
- east yorkshire
we are just on with 2 doors and have given the job to east yorkshire shutters. same spec as emmerson quoted but a lot cheaper.they came highly recomended from someone who has had a lot of doors from them
Ok thanks, what sort of time from ordering to fitting has there been? I don’t want to be without a door after harvest that’s all I’m thinking.
rob h
Member
- Location
- east yorkshire
Not got them fitted yet as we only confirmed the order on Tuesday as we changed 1 door from a single phase tube motor to 3phase geared.so they wanted to come out and check the clearance before ordering as the doors are side by side.but they said 3weeks so will see when they arrive.
Just dragging this one back up. Got a quote from Emmerson, Middas and Auto roll. of the 3 quotes, 2 are very similarly priced, the other is 40% cheaper....
the farmer in me is running for the cheap quote but the old wise owl in me is very concerned at such a disparity!
Spec looks the same, anyone care to comment on the BSEN numbers from these two extracts?!
Spec 1:
1 HERCULES – Power Operated Roller Shutter
Included in the price
• 75mm Traditional Single Skin Galvanised Lath – 18swg
• Heavy Duty Mild Steel Endplates – 12mm
• Heavy Duty 100 x 75 x 8 RSA - Guide Angle supports
• Heavy Duty Windguide - 102mm x 31mm Galvanised to BS EN ISO 1461:2009
• Anti-fall back device
• Heavy Duty Steel Endlocks to prevent lateral movement
• Heavy Duty inverted ‘T’ section bottom rail
• 3 Phase Motor Kit – Country of Origin Germany
• Barrel Assembly – 298mm Outside Diameter
• Push Buttons (Open / Close / Stop)
• Bottom Rubber Seal
Spec 2
Comprising 3” x 18swg solid laths, 104mm wind lug guide section with heavy-duty wind anchor end locks, every 4th lath, level 2 guide bracing and a suitable safety device to comply with current Construction Products Regulations. XXX door products are manufactured to meet the requirements of BSEN13241-1 and are supplied with a UK CA mark to show compliance.
its a big investment and i dont feel i have a good enough handle on what im about to order!
the farmer in me is running for the cheap quote but the old wise owl in me is very concerned at such a disparity!
Spec looks the same, anyone care to comment on the BSEN numbers from these two extracts?!
Spec 1:
1 HERCULES – Power Operated Roller Shutter
Included in the price
• 75mm Traditional Single Skin Galvanised Lath – 18swg
• Heavy Duty Mild Steel Endplates – 12mm
• Heavy Duty 100 x 75 x 8 RSA - Guide Angle supports
• Heavy Duty Windguide - 102mm x 31mm Galvanised to BS EN ISO 1461:2009
• Anti-fall back device
• Heavy Duty Steel Endlocks to prevent lateral movement
• Heavy Duty inverted ‘T’ section bottom rail
• 3 Phase Motor Kit – Country of Origin Germany
• Barrel Assembly – 298mm Outside Diameter
• Push Buttons (Open / Close / Stop)
• Bottom Rubber Seal
Spec 2
Comprising 3” x 18swg solid laths, 104mm wind lug guide section with heavy-duty wind anchor end locks, every 4th lath, level 2 guide bracing and a suitable safety device to comply with current Construction Products Regulations. XXX door products are manufactured to meet the requirements of BSEN13241-1 and are supplied with a UK CA mark to show compliance.
its a big investment and i dont feel i have a good enough handle on what im about to order!
Steevo
Member
- Location
- Gloucestershire
The BSEN no. in the first spec is surely just about the galvanising spec?
The second one is relates to industrial doors.
Did you order?
Who was cheapest?
designanddetail
Member
You still have time to get another price then.. Worcester Doors are very good. good doors and good backup if needed.
DP Doors at Sheffield did two insulated panel doors for us, spot on.
East Yorkshire shutters have a good name locally too
Who did yours in the end @benny6910 ?
East Yorkshire shutters have a good name locally too
Who did yours in the end @benny6910 ?
It didn’t get done in the end, lead time was going to push it past harvest so I didn’t bother ordering.
- Tags
- harvest
The London Palladium event “BPR Seminar”
This is our next step following the London rally 
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
lwtheatres.co.uk
BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth
Join us @LondonPalladium on the 16th for beginning of UK business fight back
BPR Summit | LW Theatres
lwtheatres.co.uk