Roller shutter door

[TrewithickFarm]

Have got a new 80 x 40 GP/Lambing shed going up. Just thinking about a roller shutter door on it. Can you get them in any sizes?

 

[Bob lincs]

Yes you can . Look on the Autoroll website . We have fitted a few of their doors and they are very good

 

[TrewithickFarm]

Yes you can . Look on the Autoroll website . We have fitted a few of their doors and they are very good

Thanks Bob, Just checked them out. look a very good company. Door way on shed is going to be 12ft x 12ft. are they pretty simple to install?

 

[TrewithickFarm]

@Bob lincs

I asked the company building my shed if they could quote for supplying a single phase RSD and they have come back with £2200 + Vat which seems a little steep to me looking at some online prices...

Would it be fairly straight forward to retro fit a door after the shed is up? I am having the door way on the right hand side not in the middle.

 

[upnortheast]

We bought a s/h manual one in vg condition from a demolition contractor. Simple to install
Got a new electric one for another shed from https://www.boltongateservices.com/maintenance-and-repair-services/roller-shutters-and-grilles/
Think they are nationwide

 

[Exfarmer]

We fitted 3 second hand roller doors to some sheds A few years back
easy enough to fit if you have a teleporter and are decent with a welder.
make sure the width is right then you weld it in place rolled up, then let it down to weld the side runners in place.
Be careful to set the limit stops right

 

[Bob lincs]

@Bob lincs

I asked the company building my shed if they could quote for supplying a single phase RSD and they have come back with £2200 + Vat which seems a little steep to me looking at some online prices...

Would it be fairly straight forward to retro fit a door after the shed is up? I am having the door way on the right hand side not in the middle.

You definitely buy online cheaper and fit you can fit it yourself there would be a good saving to make. Fitting them isn’t rocket science we did our first one with no problems .

 

[Wurzeetoo]

Admittedly not agriculture but in a retail setting I’ve recently been hit with a fair few replacement roller shutter bills as according to firm they are now classed as machinery needing an annual safety inspection with compliance certification and if shutter doesn’t have adequate safety brakes they are condemned with the option of retro fitting said safety features or in my case complete replacement units. Wondering if anyone else has had any problems?

 

[TrewithickFarm]

Excellent thankyou all ??

 

[Grassman]

I have 3 autoroll doors 15ft wide. Can't fault them for the money. Got three for a fraction of the price of 1 fitted by a specialist company.

 

[TrewithickFarm]

I have 3 autoroll doors 15ft wide. Can't fault them for the money. Got three for a fraction of the price of 1 fitted by a specialist company.

Do they do doors with personnel doors?

 

[Grassman]

Ring them. They advertise on ebay