RTX Range point to Egnos

[db9go]

One of our units subscription has run out for rang point and can not get any one at Trimble to renew it before Monday how do i change it to Egnos for the time being it is a CF750

 

[PSQ]

It should default to EGNOS when the RTX license runs out..

At least thats what mine did last year. I mentioned that the 750 had been slightly off line for most of the day to the other driver, and he replied that it had flashed up a warning a few days before to say the subscription was about to run out

Beware also that when you renew the sub you must then go into the settings and select RTX as the correction source from the menu, as it doesn't automatically change back from Egnos to RTX when you enter the license code. It took me a further day of wonky driving work that one out. Check the correction source using the info button (?) top left of the screen, scroll through 'measured area' etc until it shows correction source.

 

[db9go]

It should default to EGNOS when the RTX license runs out..

At least thats what mine did last year. I mentioned that the 750 had been slightly off line for most of the day to the other driver, and he replied that it had flashed up a warning a few days before to say the subscription was about to run out

Beware also that when you renew the sub you must then go into the settings and select RTX as the correction source from the menu, as it doesn't automatically change back from Egnos to RTX when you enter the license code. It took me a further day of wonky driving work that one out. Check the correction source using the info button (?) top left of the screen, scroll through 'measured area' etc until it shows correction source.

I have for got how to get into the system to change it is so long since i have had to do it

 

[PSQ]

You don't need to change the settings to Egnos, it should have done it itself. Have a look at the 'info' tab (top left) to check.

 

[Slick]

Settings.
GNSS setup.
Select Egnos.
Select either Favour accuracy or balanced quality.
Tick your way back to the run screen.

 

[db9go]

Settings.
GNSS setup.
Select Egnos.
Select either Favour accuracy or balanced quality.
Tick your way back to the run screen.

Thanks all it worked for today on Egnos

 

[GPS_Support_2014]

and can not get any one at Trimble to renew it before Monday

You can sort the subscription yourself: https://tpsstore.trimble.com/OA_HTML/tnvovrs_ibeCZzpHome.jsp?minisite=11323

 

[db9go]

You can sort the subscription yourself: https://tpsstore.trimble.com/OA_HTML/tnvovrs_ibeCZzpHome.jsp?minisite=11323

I no i can when i went in to to do it it would not let me do it as it did not recognize my pass word and that is were the problem started from and i had to wait until Monday to get it sorted whether by phone or email no help was available.