Rubber Tracks Quadtrac

[Azer]

Hi, I'm looking for some old scrap quadtracs which are the wider 36" tracks or some narrow CAT type tracks around 18" wide, either scrapped from being torn or the middle ripped out. Looking to use them on a steam engine if anyones got any to get rid of.

Cheers,

Aaron

 

[Azer]

bump

 

[Farmboymark]

@Halftrack

 

[simon-0116]

Try local case dealers save them paying to get rid

 

[Azer]

Cheers simon-0116 will have a look see what i can find.

 

[Spencer]

Got some 30" ones..

 

[Elliott]

Farm I know has some in the hedge. Not sure of width. Will have a look tomorrow

 

[Azer]

Cheers Elliot , any luck are they 36" wide tracks?

 

[Elliott]

Cheers Elliot , any luck are they 36" wide tracks?

Hello yeah sorry I asked them today and the assistant manager said they wanted to keep some but scrap others, but trying to get a firm answer is tricky as the manager is away on holiday, so won't know until he is back. Had a quick measure with my leatherman and they seemed to be 32" but it was very rough, so must be the 36". Will keep trying for you. The farm is in Kent towards margate. Where abouts are you?

 

[s~~t shoveller]

Got some thirty inch ones here but not what your looking for...

 

[Azer]

Hello yeah sorry I asked them today and the assistant manager said they wanted to keep some but scrap others, but trying to get a firm answer is tricky as the manager is away on holiday, so won't know until he is back. Had a quick measure with my leatherman and they seemed to be 32" but it was very rough, so must be the 36". Will keep trying for you. The farm is in Kent towards margate. Where abouts are you?

Ah thanks for looking anyway, the 36" seem to be hard to find compared with the 30s, and I'm from the midlands near leicester

 

[Lincsman]

I have four 30" ones if you are desperate and like cutting!.. free for collection

 

[Azer]

Cheers for the offer lincsman will keep that in mind if it comes to that, and just the one cut on them is bad enough

 

[fieryfoster]

I have four 30" ones if you are desperate and like cutting!.. free for collection

Hello lincsman , i'm in need of tracs 30'' wide to cover 6' diameter wheels [approx 20'' plus long]

 

[Lincsman]

Cheers for the offer lincsman will keep that in mind if it comes to that, and just the one cut on them is bad enough

Would it matter is 3" on each side wasnt covered?.. it wouldnt touch the ground.

 

[Lincsman]

Hello lincsman , i'm in need of tracs 30'' wide to cover 6' diameter wheels [approx 20'' plus long]

PM me.

 

[fieryfoster]

Would it matter is 3" one each side wasnt covered?.. it wouldnt touch the ground.

Do you mean that once cut down the middle [making 15'' strip ]that the tread would be 12'' wide ?

 

[Lincsman]

Do you mean that once cut down the middle [making 15'' strip ]that the tread would be 12'' wide ?

I was thinking of the OP wanting 36", just put 30" down the middle and leave the inner and outer edge of you wheel uncovered ie 3" each side.
But actually your idea of cutting down the middle would be better in case you touched a kerb etc and have 6" missing in the middle, it would be do-able as the left and right cleats dont overlap the middle.

PS. I have 5 tracks on the heap!

 

[fieryfoster]

I was thinking of the OP wanting 36", just put 30" down the middle and leave the inner and outer edge of you wheel uncovered ie 3" each side.
But actually your idea of cutting down the middle would be better in case you touched a kerb etc and have 6" missing in the middle, it would be do-able as the left and right cleats dont overlap the middle.

PS. I have 5 tracks on the heap!

I think the best thing I can do is come and have a look . my tel 07802400060

 

[fieryfoster]

Got some thirty inch ones here but not what your looking for...

What's the condition , and where are you