I've a large quantity of beams and c section purlins , which I have to dismantle and remove from Aberdeen at short notice
i take it your in ScotlandI've a large quantity of beams and c section purlins , which I have to dismantle and remove from Aberdeen at short notice
noIs it a shed?
try and sell it as a floor, i have sold a few like this in parts areas in car show room refurbs i suppose the dilemma is WEATHER to sell or keepno
It's a mezzanine floor , so , 2.9m high 100mm box legs , cross beams , and 6m c purlins, all decked out with 40mm chipboard , 3 staircases,
Oil company put in about 4 yrs ago , mental , it's 34m by 16 and another 10x 11m
Ye cleats all bolted , it's mint , will try some steel,through thainestone , at end maysave the steel it will come in, if your lucky the cleats will be bolted on that take the channels so leave you with clean beams just holes in,get yourself a battery nut gun impact sockets and a universal joint (only use impact) the screws can be a bit difficult use a impact driver with good quality bits to remove screws