- Location
- Devon
I would like to sow grass seeds off a set of rollers. Seed would be blown back from a front hopper. The outlet on the hopper is 152mm.
I have found an accord distribution head and stack which is 100mm.
If I use 152mm pipe all the way from the hopper to the accord stack, and then use all the outlets on the distribution head for the seed, will I get around any potential problems with back pressure from the change in pipe size?
I have found an accord distribution head and stack which is 100mm.
If I use 152mm pipe all the way from the hopper to the accord stack, and then use all the outlets on the distribution head for the seed, will I get around any potential problems with back pressure from the change in pipe size?
