Setting max height JD 125R 2013 model

[chris4000]

Tried using the pick up hitch on our 6125R this afternoon,only had it a few weeks,couldn’t get it to lift high enough ,the lift arms on button G are set at 96 max,needs a bit more .says in book to press the plus button but doesn’t work must be another button to press first,
Chris

 

[KB6930]

Press lift height button on the side which will bring up the lift height section on screen press the green tick to highlight it then use the black roller knob to turn it up to 100 I think but not 100 percent sure as I missed out the early R series but that's how the 30 series work

 

[chris4000]

Thanks for your reply,I’ve done that but it’s slightly different to our 7530 and 6630 can’t work out the + and - buttons

 

[KB6930]

I'm out then I had them on demo but can't remember anything complicated about them

 

[brentnz]

Thanks for your reply,I’ve done that but it’s slightly different to our 7530 and 6630 can’t work out the + and - buttons

You may not have the touch screen where you touch the graph and the buttons appear. In which case use the green buttons and scroll wheel

 

[fred.950]

Press the button with the red arrow, make sure it’s highlighted using the button with the yellow arrow and dial it up using the dial with the green arrow! If yours is different then I’m afraid I can’t help.

 

[chris4000]

Thanks Fred,that’s the same as ours by the pictures,perhaps ours is a touch screen,that is how we do it on our 30 series jds

 

[chris4000]

Have to get the book out again