Simba Freeflow raising/lowering

[Paul G]

Just bought a 4m Simba Freeflow. When you lower it the rams on the rear packer go down the whole way before the drawbar ram starts to lower. I’m assume that the front and back rams should raise/lower simultaneously? At the moment the rear harrow is the first thing to hit the floor meaning that it has bent. Any ideas on how to sort this out?

 

[Yorkshire lad]

Mine lowers the same way

 

[Brisel]

Separate them onto different spool valves? I'll bet the back drops first because it is the heaviest & the oil is taking the path of least resistance. You could try restricting the flow to the back and improving the flow to the front ram if you want to keep it all on one spool.

 

[Adeptandy]

Both of mine worked like this, but sounds like you need to adjust the harrow, not bent mine as yet