Slewtic Muck Fork

[McD]

I need a muck fork for my digger. Is Slewtic forks any good?

 

[ACEngineering]

xform is the best. what digger and what size do you want? just a fork or a grab?

 

[McD]

xform is the best. what digger and what size do you want? just a fork or a grab?

Mf 50hx . Have a 7ft just now and would like a little bit bigger. Just a fork, i don't need a grab.

 

[Wombat]

Have a 7ft6 slewtic since 08 and still in good nick, gets used for feeding silage bales as well as mucking out etc and stood up well

 

[McD]

Have a 7ft6 slewtic since 08 and still in good nick, gets used for feeding silage bales as well as mucking out etc and stood up well

Is yours standard or high tensile?

 

[Wombat]

I cannot remember but I think it would be a standard don't think I would have paid for high tensile, will check the plate when near it and see if it says

 

[ORRA LOON]

A neighbour has not long bought 1 with a grab on from Sellars and is very happy with it. They are using it on big tractor loaders and Merlos.

 

[Dave6170]

There's bugger all wrong with slewtic

 

[ACEngineering]

Can supply a Cherry made one. Xform are no longer making just the forks they only doing Grabs now probably because very few forks were sold?

One pictured is Hardox tines but they will make one with KV tines and any brackets of your choice within reason!

There is very little in the price between KV tines and Hardox its not worth worrying about.

 

[McD]

Can supply a Cherry made one. Xform are no longer making just the forks they only doing Grabs now probably because very few forks were sold?

One pictured is Hardox tines but they will make one with KV tines and any brackets of your choice within reason!

There is very little in the price between KV tines and Hardox its not worth worrying about.

How much. Mf50 brackets delivered to Aberdeenshire

 

[ACEngineering]

How much. Mf50 brackets delivered to Aberdeenshire

Check your inbox I sent you a PM a few hours ago?

 

[Fergieman]

If you are wanting to move bales with the fork go for KV tines, the hardox or high tensile steel are not easy to spike into bales. If only muck and clamp silage hardox all the way, no nuts to keep tight.

 

[McD]

Check your inbox I sent you a PM a few hours ago?

Just found it. Cheers

 

[McD]

If you are wanting to move bales with the fork go for KV tines, the hardox or high tensile steel are not easy to spike into bales. If only muck and clamp silage hardox all the way, no nuts to keep tight.

Good point hardox wouldn't work very well loading bales. It's just for loading a muck spreader and bales.