Spearhead hedge cutter oil pressure and flow

[Sharny dubs]

Hello ladies and gentlemen. I've got a 606 highway. I think the head motor has gone as the rotor has next to no power and the system is heating up. Before I order parts the mechanic wants to check oil pressure and flow to make sure the pump is ok. Is there any hedge cutter experts out there who can point me in the direction of what it should be doing. It's a 2006 machine with a piston pump.

Tia

 

[Mr Happy]

Hello ladies and gentlemen. I've got a 606 highway. I think the head motor has gone as the rotor has next to no power and the system is heating up. Before I order parts the mechanic wants to check oil pressure and flow to make sure the pump is ok. Is there any hedge cutter experts out there who can point me in the direction of what it should be doing. It's a 2006 machine with a piston pump.

Tia

Before you buy a new motor you are correct to flow and pressure tested the pump and check what pressure test what the prv is operating at. If you let me know the pump part number and the pto gear box ratio I can give some idea of pump flow. There should be info on Google about your model of hedge cutter to.

 

[Sharny dubs]

Before you buy a new motor you are correct to flow and pressure tested the pump and check what pressure test what the prv is operating at. If you let me know the pump part number and the pto gear box ratio I can give some idea of pump flow. There should be info on Google about your model of hedge cutter to.

PM sent
Thank you