Im looking to get a speed signal from the tractor for and electric air seeder we have fitted to our power harrow. The 18plate valtra n134 hasn’t got the round plug pictured below but has got the rectangular output on the topcon.
Is there an easy way around this as manufacture is suggesting fitting a magnet to the prop-shaft and a sensor.
This all seems a bit excessive and I’m just wondering if theres an easier solution.
Thanks in advance
Mark
Is there an easy way around this as manufacture is suggesting fitting a magnet to the prop-shaft and a sensor.
This all seems a bit excessive and I’m just wondering if theres an easier solution.
Thanks in advance
Mark
