Sprayer Help Please

[Gander]

Can anybody identify this Hardi sprayer? I've borrowed it from Dad, he bought it second hand a few years ago and has no book for it.

I just did the first round of the first field after waiting ages for the right conditions. I hit a rut and the connector for the main feed pipe from the pump into the pressure gauge cracked off!

I'll post some pics in case anyone can identify it, or can point me in the right direction for parts and how to go about fixing it.

Thanks.

 

[warksfarmer]

Hardi TZ 2400 and good luck !! Ours was a shocker. Crap booms. Crap pump.

 

[ridger]

Cant just see what holds it together, is the green bit threaded?
The joint would have been cracked for a while then the rut finished it off. www.spraytips.co.uk have most fittings and connectors that i ever need.

 

[Gander]

Thanks..I think!

It was bought at a farm sale. Only looks after 10ac of wheat and 100ac of grass so it's not got a massive workload!

 

[Gander]

Cant just see what holds it together, is the green bit threaded?
The joint would have been cracked for a while then the rut finished it off. www.spraytips.co.uk have most fittings and connectors that i ever need.

Yes it's the green bit that has cracked. It looks to be threaded at the bottom where it enters the pipe. The other half is in the manifold but I can't see how to get that out.

 

[ridger]

It look like it should screw out, used to have things like that happen a damann sprayer i had. It will probably be well stuck in

 

[SimpersTradeCounter]

The green part just pulls out with an O ring around its outer edge.

Neil

 

[John 1594]

as neil says, green bit pulls out, there a circlip holding it in. I had one to bits last week, there is a hole in the green part what holds the base of the ball valve what controls the main on/off

 

[SimpersTradeCounter]

And they are notorious for snapping just where yours has snapped, so don't feel bad!!

Neil

 

[Gander]

Thanks Neil and John. Ill go and see if I can get it out.

 

[Andy26]

Can anybody identify this Hardi sprayer? I've borrowed it from Dad, he bought it second hand a few years ago and has no book for it.

Click on the TZ link at the bottom of the page to download the instruction book.

http://www.hardi.co.uk/index.php/gb...&doc_q_7265=&filterByKey=&filterByVal=&page=2

 

[Gander]

Click on the TZ link at the bottom of the page to download the instruction book.

http://www.hardi.co.uk/index.php/gb...&doc_q_7265=&filterByKey=&filterByVal=&page=2

Thanks. I found that last night.

Also, thanks (and a recommendation!) to Simpers Trade Counter! We've identified the bits I need and Neil is sorting it for me. I love this forum.