Sulky power harrow

[MF-ANDY]

Any tips on changing the quickfit tines on a sulky HR 400-20 power harrow. Looks like they are unlocked by putting a tool on a square nut on the hub?? We have the tool and hopefully I have quoted the correct model number. Tia

 

[radar]

Any tips on changing the quickfit tines on a sulky HR 400-20 power harrow. Looks like they are unlocked by putting a tool on a square nut on the hub?? We have the tool and hopefully I have quoted the correct model number. Tia

Changed ours twice now. Needs to be tipped up on the front (drill off too) so you can get in. Square tool on centre nut and turn 90 degrees. Can't remember whether you push it in or not. After turning the tine should just pull out. After new tine inserted turn nut back 90 degrees to lock.

 

[MF-ANDY]

Thanks. yes that's what we thought. Was hoping to leave drill on but maybe not then.

 

[Lewis821]

@Robt

 

[Robt]

It’ll be a HR4000.22. Depending on what year as to which tine holder was fitted. Pm me Andy if you need more help. Any friend of Partstech is a friend of mine!

 

[MF-ANDY]

It’ll be a HR4000.22. Depending on what year as to which tine holder was fitted. Pm me Andy if you need more help. Any friend of Partstech is a friend of mine!

It's definitely the one where you turn the square 90deg. Will be giving it a go Tuesday hopefully

 

[Robt]

Ok, any questions, please call 01480 276127 and press option 2. That will take you straight through to Richard German ( technical manager uk)