- Location
- The moon
Hi all,
Ive a tanco Miniwrap 404 bale wrapper which ive view to fit the auto stop on after using a newer one which did stop on completion of the amount of turns required. Ive found a company that supplies the computer kit reasonably priced, which outputs a 4a 12v when the set amount of cycles is reached.
http://www.hollinapplications.co.uk/Agricultural/Wrap.htm
Ive contacted tanco in regards to this kit which they will gladly supply however at an eye watering price. can anyone identify the knock out solenoid or where i could source one? the hydraulic valve has a detent which when pulled back will allow the wrapper to spin. origionally it had a very basic revolution counter fitted which needed someone stood with it all the time;
find attached the 'KIT' that tanco are suggesting may be available through my nearest dealer.... what im seeing doesnt surmount to the value of nearly £600.00 can anyone identify what the actuator actually is?
Ive a tanco Miniwrap 404 bale wrapper which ive view to fit the auto stop on after using a newer one which did stop on completion of the amount of turns required. Ive found a company that supplies the computer kit reasonably priced, which outputs a 4a 12v when the set amount of cycles is reached.
http://www.hollinapplications.co.uk/Agricultural/Wrap.htm
Ive contacted tanco in regards to this kit which they will gladly supply however at an eye watering price. can anyone identify the knock out solenoid or where i could source one? the hydraulic valve has a detent which when pulled back will allow the wrapper to spin. origionally it had a very basic revolution counter fitted which needed someone stood with it all the time;
find attached the 'KIT' that tanco are suggesting may be available through my nearest dealer.... what im seeing doesnt surmount to the value of nearly £600.00 can anyone identify what the actuator actually is?
