Tm rear linkage control

[Farmer mk1]

Hello, anyone had issues with the rear linkage mud guard control not working. I put a second hand edc valve on it as one on ours went faulty. Now the linkage works fine in the cab but it doesn’t work on the fender buttons. It some times work but sometimes doesn’t. Anyone had any issues like this before.
Also once I fitted the slice it worked on the rear buttons but it would creep up abit then stop then creep abit more and stop. Anyone had anything like that aswell?
Thanks
Mark

 

[Combine Rescue]

You need to H8 on the tractor to erase calibrations a stored and the with the next power cycle controllers will scan what is connected an will add your switches and of course you need recalibrate

 

[Farmer mk1]

I was thinking it would need a complete erase. I’ll get the plug in and the laptop and get it sorted. Thanks. I put it up on a few forums and no one has answered it so thanks for your input! Cheers

 

[Combine Rescue]

Some times is an option in one of the H menu in for controller.
But is good practise to H8 on tractor and recalibrate.

 

[Farmer mk1]

Im going to do it this weekend while putting a new rad on it.