Today at work

[simmy_bull]

Sorted a muck for straw deal with a friend so spent few evenings loading his trailers.

View attachment 682322
View attachment 682324
View attachment 682332

He's got a new guy working for him who has 'grown up on tractors'

Unfortunately he hadn't grown up on them long enough to realise what happens when It isn't level when you tip.

View attachment 682326

@Nearly paid us a visit this afternoon with his skidsteer to clean out a few pens.

Huge help as loader can't get in to them so usually have to clean out by hand

View attachment 682328
View attachment 682330
View attachment 682334

What the hell happened there? Looks like a level site for tipping? Much damage?

 

[Gerbert]

Some slurry out on the silage ground
View attachment 682140

Duport injector isn't it? Nice!

 

[Adeptandy]

Do you breed the dogs?

Its Mrs Adeptandy’s venture really, and it’s grown to big to be in the home anymore. So as we’re moving seemed a good time to utilise a shed that wasn’t any use for machinery or crop storage into something that will let the breeding expand to meet demand [emoji41]
Will help when/if subs go as well [emoji6]

 

[X344chap]

Spotted the porn down the back of the seat on the JD

 

[Tomtrac]

It never does on the phone and under led lighting

How about one with a couple of runs on
so we know you are human after all ralmfao
Go on you must have one or two miss haps you could post lol

 

[Tomtrac]

View attachment 682684
Today's task. Hard work when you are on your own! [emoji57]

Just put a hitch on the rear of the skid lol
Or get a loader tractor/ handler
In an ideal world
Heck id be lost with out my hitch on my jcb tm300

 

[nick...]

Been back on a barn conversion again yesterday,fir some reason I could not post pics last night.dug out a lot of hard standing round house and replace with soil,new path to house and started on car park.back again next week and got 60 ton of crushed concrete coming to level from garage base to road and stream on boundary.
Nick...

 

[Warp Land Farmer]

Started side cladding today, the 13 meter long 140kg gable sheets took some handling

View attachment 682680

Why didn't you use a Cladboy?

 

[RWG Contracts]

Why didn't you use a Cladboy?

They but ever so slight dents in the tin where they’ve lifted and this customer is one of them who will notice it and make you change the sheet

 

[Gator]

First of 2 lots gathered last neat, gave rain so shut um inside for the neat, least they'll be dry.

Off to @Darren Hough s first to help with his then back here

Gona be a long day

 

[JLTate]

What the hell happened there? Looks like a level site for tipping? Much damage?

All I can say is what they said. I was loading it and they were tipping 6 miles away so didn't see it happen

Apparently far side was in a tramline

It caught side of there JCB cab so fair bit of damage to that. Dents in trailer. 7810 got away undamaged

 

[Bob c]

i was
but the budget went on some thing to make it easier for other half a less ear ache for me

First of 2 lots gathered last neat, gave rain so shut um inside for the neat, least they'll be dry.View attachment 682748

View attachment 682752
View attachment 682754
Off to @Darren Hough s first to help with his then back hereView attachment 682758
Gona be a long day

plenty of tea and buns,......you will be fine

 

[REStracTORATION]

How about one with a couple of runs on
so we know you are human after all ralmfao
Go on you must have one or two miss haps you could post lol

Yes there is runs ...... On the side of the paint tin

 

[mixed breed]

Dad's been buying again only wants a bit of welding he said

I did my "ffs it's not fit for purpose" bit that got me nowhere, so I thought I'd best attack it

cut the old bushes out and got some new ones.

as the box section was bust out I cut some 15mm plate and plasma cut a hole to fit the bush and got them both lined up. Then with a bit of glue, stuck it back together

dad will be bragging his bargain hunting up, come the morning!

Only thing I'm pondering is the bolts/washers that hold the tubes on.. The old ones were going threw the centre of the leg, but I'm wandering if they'd be better on the outside like so

someone is bound to know

 

[Gerbert]

Invasion of the storks, there where 6 of them.

First time stuck on the pit today after about 13 years on the wagon.

 

[davidroberts30]

if you keep welding them up he'll keep buying them

 

[R tea]

Dad's been buying again only wants a bit of welding he saidView attachment 682850 I did my "ffs it's not fit for purpose" bit that got me nowhere, so I thought I'd best attack itView attachment 682852 cut the old bushes out and got some new ones. View attachment 682854as the box section was bust out I cut some 15mm plate and plasma cut a hole to fit the bush and got them both lined up. Then with a bit of glue, stuck it back togetherView attachment 682858dad will be bragging his bargain hunting up, come the morning!

Only thing I'm pondering is the bolts/washers that hold the tubes on.. The old ones were going threw the centre of the leg, but I'm wandering if they'd be better on the outside like so
View attachment 682862someone is bound to know

I bought a brand new one of those last year for £650, that one you have must of been really cheap.

 

[mixed breed]

I bought a brand new one of those last year for £650, that one you have must of been really cheap.

Saved £300 over a new one. But then there's my time, electric, rods, and the bushes. Plus it'll probably fall to pieces soon as I start using it.

 

[JP1]

Crichton collective sale today

Various work lots and a little builders trailer from me to sell

Bought a little bowser

General photos from today

 

[JP1]

Ultra low stocking rates still mean moving lots of stock around due to the drought