- Location
- North West Wales
Ideally when enlarging a hole with a broach you need to fashion a pin or step bush to fit the hole and fit inside the new broach. That way it supports the broach for first few mm and ensures it’s kept in centre.
Today at work
- Thread starter Penmoel
- Start date
Ideally when enlarging a hole with a broach you need to fashion a pin or step bush to fit the hole and fit inside the new broach. That way it supports the broach for first few mm and ensures it’s kept in centre.
davidroberts30
Member
- Location
- pembrokeshire
Good job the plough is set up good
Greenbeast
Member
- Location
- East Sussex
It's getting complicated now, here's to the next three years of the euro8 sitting idle
- Location
- East Sussex
It's getting complicated now, here's to the next three years of the euro8 sitting idle
Gas axe!!!!!!!!
simon-0116
Member
- Location
- Sheffield
Rewired vaderstat carrier after some thieving twit removed cables when left In field. All for £3 0f scrap copper. Most of day, roll of 7core plugs etc.
boyo
Member
- Location
- pembrokeshire
I must admit its better than my usual standard well done youGood job the plough is set up good
Greenbeast
Member
- Location
- East Sussex
Got the final 5 verticals in, on the new farrowing pen, this morning.This afternoon planning on starting the struts
I hope this is worth it, first attempt at a decent, safe, manageable outdoor farrowing unit.
I hope this is worth it, first attempt at a decent, safe, manageable outdoor farrowing unit.
- Location
- North West
Not been much happening past couple of days with the rain, did managed to finish cutting the canary seed though before the heavens opened.
Got this on demo for a couple of days to have a play with.
Very easy pulling, using less than half the fuel I do with the combi.
Got this on demo for a couple of days to have a play with.
Very easy pulling, using less than half the fuel I do with the combi.
Last edited:
Steevo
Member
- Location
- Gloucestershire
Sowing OSR?
- Location
- the brecks norfolk
Spraying the beet today.
Considering the dry time they've perked up well but I can't get excited about them yielding well.
Maybe this will help, magic potion.
Considering the dry time they've perked up well but I can't get excited about them yielding well.
Maybe this will help, magic potion.
Look much better than lots I've seen, no reason why they won't yield if left long enough.
Edit- mine included!
Last edited:
- Location
- the brecks norfolk
That's going to be the key factor for yield this year, late lifting. I recon they're about where they'd normally be for show week.Look much better than lots I've seen, no reason why they won't yield if left long enough.
Edit Norfolk show week
- Location
- North West
Just cover crops.
The weekends welcome rain made last Thursdays sown fodder crop show its face.. Well one of them anyway
School holidays and the boss has been busy helping
New addition to the family arrived last night
started the last 30 acres of spring corn
Greenbeast
Member
- Location
- East Sussex
Got the final 5 verticals in, on the new farrowing pen, this morning.This afternoon planning on starting the struts
I hope this is worth it, first attempt at a decent, safe, manageable outdoor farrowing unit.
First strut in
Dogs hard at work, Frank's even on the old homebrew if you look closely, he must have found it somewhere in the rubbish
Got 4 struts in out of 14, i don't think i'm too bad at this fencing lark but i am slow!
- Location
- Breckland
What's the going rate to release this?
mar
Member
- Location
- Ulster (Rep of Irl)
What size is the trailer, is it a 12 ton
- Location
- Breckland
I'm feeling generous so we agreed on £50. Quick meal of sausages and I'm out to enjoy it
Steevo
Member
- Location
- Gloucestershire
Free flight?
I always think it’s strange that there isn’t an officially negotiated rate.
I’m not against goodwill at all....far from it. But i also think it strange that it’s almost accepted practice to knowingly take off not knowing whose property you will land on. If you were landing at an airport there would be a set fee, plus surely you’d need to book a slot?