Topcon steering wheel adaptor for Massey 2004 6480

[Romney_Rob]

It's a long shoot but does anyone have a steering spline adaptor to fit a topcon auto guidance steering wheel to a 2004 Massey 6480?

 

[Jerry]

@Devon James

 

[Devon James]

May sell it, not sure if keeping the tractor. Ours is for a 2009 6480, maybe different. I will come back to you!

 

[Romney_Rob]

If you could that will be great thank you very much

 

[phil]

If you could that will be great thank you very much

I needed one for a fendt 724, the cheapest way to do it was buy a Fendt steering wheel and cut out the splines and make up flange to bolt to motor
Drastic I know but platform kit from Trimble was scandalous price

 

[Romney_Rob]

Great idea Phil, i will try and find a Massey breakers

 

[phil]

Great idea Phil, i will try and find a Massey breakers

Thinking that might be a possibility alright

Obviously they don't break Fendts so that wasn't an option for me [emoji6]

 

[Romney_Rob]

I needed one for a fendt 724, the cheapest way to do it was buy a Fendt steering wheel and cut out the splines and make up flange to bolt to motor
Drastic I know but platform kit from Trimble was scandalous price

Do you have a picture of that please?

 

[phil]

It's in tractor
Basically the splines in a steering wheel centre have spokes, cut off spokes and weld to round plate that bolt into motor
I think I have a JD one I'll take a picture of that. It's a Trimble one but I assume it's similar set up