Topcon X30 not Initializes

[Vicente Donadel]

I have a monitor Topcon X30 that not booting, to connect the machine does not load the user interface getting the black screen, it seems to me it can not boot it.
I wonder how do I reinstall the operating system on it ... the update files I have because I work at a dealership of Massey Ferguson ... I need some other program basis before reinstalling it ?? Which door I make this intervention? need some adapter cable?

 

[croppers]

When you try to power the x30 up what colour are the two led lights on the right hand side of the screen?

 

[Brisel]

@Robt

 

[Robt]

I'm guessing you may not be in uk? If so try putting new software back on, or call agco support for your country if it's an agco c3000 terminal ( different to x30)

 

[Vicente Donadel]

When you try to power the x30 up what colour are the two led lights on the right hand side of the screen?

In reality I not noticed this detail, but already sent the X30 to The warranty.
But what would be the logic of LEDs?
At first the operation it is okay because the software update process occurs normally. After finishing the update and remove the pen drive the error message saying that the boot was not found keeps popping up.

 

[Vicente Donadel]

When you try to power the x30 up what colour are the two led lights on the right hand side of the screen?

 

[Vicente Donadel]

In reality I not noticed this detail, but already sent the X30 to The warranty.
But what would be the logic of LEDs?
At first the operation it is okay because the software update process occurs normally. After finishing the update and remove the pen drive the error message saying that the boot was not found keeps popping up.

 

[Robt]

The LED lights are not relevant in this situation. It's hard drive fault.
Did AGCO provide a replacement?

 

[Vicente Donadel]

Yes, when you have this kind of problem the only thing to do is replace the equipment

 

[Timbo]

agreed- the hardisk has failed or the boot sector is corrupt.