Torque setting for big ends and mains, mf 32 combine

[devonshire farmer]

@mf Andy looking for the above, valtra engine same engine as a mf 3680 just wanting to check the torques while putting new oil suction pipes in this morning, as engine is out and it's not easy to remove it makes sense to check them!
Tia

 

[devonshire farmer]

Feel free to tag anyone who may know!

 

[Netherfield]

@MF-ANDY @masseybreaker

 

[Morph]

@devonshire farmer Solved the issue of low oil pressure? Photo's?

 

[masseybreaker]

text me you email address i will email the pages out of the workshop manual it is a 612 engine ? 07710153603

 

[MF-ANDY]

If its a 612.
Big ends 90nm
Mains 200nm

 

[MF-ANDY]

From 3680 manual

 

[devonshire farmer]

text me you email address i will email the pages out of the workshop manual it is a 612 engine ? 07710153603

Sorted now thanks

 

[devonshire farmer]

From 3680 manualView attachment 700796

Thanks alot

 

[devonshire farmer]

Thanks alot

One of the offending pipes got lost by courier between here and Finland so got the old one welded up, the other side of the oil pump we put a new pipe, replaced all gaskets and an o ring and new spring on pressure relief valve, we now have 6.5 bar when cold on tick over and before we only had 4 so something has done the trick!