We have a ts115 with a light bar which I want to replace with two beacons. The light bar seems to be bolted down and I assume that the wires run through the roof somewhere. If the light bar is removed will that leave a hole in the roof? Is it a big job to change over?
Tractor beacons
- Thread starter DaraMulholland
- Start date
Tractortech
Member
- Location
- Cumbria
Now Then..
If the light bar is bolted through the roof and you remove the light bar, it's fair to assume there'll be holes left in the roof. Put bolts and washers back in!!
If the wiring can't be seen externally one would assume that the wiring must be inside the roof.
Does the tractor have provision for pole type or magnetic beacons?? I'm not too familiar with the blue type tractor, but I'm sure I've seen beacons sit in recesses on the roof on some..
If the light bar is bolted through the roof and you remove the light bar, it's fair to assume there'll be holes left in the roof. Put bolts and washers back in!!
If the wiring can't be seen externally one would assume that the wiring must be inside the roof.
Does the tractor have provision for pole type or magnetic beacons?? I'm not too familiar with the blue type tractor, but I'm sure I've seen beacons sit in recesses on the roof on some..