Tractor mounted speader for sand in cubicles?

[matthew]

As above. Is anyone using a front end loader type bucket which will scoot sea sand either side, into cubicles?
Have seen a few Canadian models but no importer info.
Thks.

 

[Homesy]

I have an AG 200. Bit heavy filled with sand but they do make smaller versions.

http://www.ag-products.co.uk/bedding-machine/

 

[matthew]

Thanks. The video shows it on a telehandler, and it looks a tad heavy, but ..... maybe the 125?
Will investigate further.

 

[pappuller]

Thanks. The video shows it on a telehandler, and it looks a tad heavy, but ..... maybe the 125?
Will investigate further.

The 150 will be the one but it may not be as wide as the tractor, the 150 with a tilt mechanism will sit on the back of a scraper tractor

 

[alan6430]

We have a shelborne Renolds 150 on a jcb handler but they do a smaller one. Very good machine

 

[stablegirl]

Mensch Sand Shooter does a good job here, heavy built and we have it on a telehandler, it weighs 3.5 ton full, but they do them for skid steers too so must fit a front loader.

Merion Thomas at Wynnstay is the man you want!

 

[matthew]

Thanks for all the replies.

 

[NitroAddict]

we had an AG sand bucket for spreading sand and we spent as much time fixing it as we did spreading, the belt and bearings can be troublesome.
We bought a WoodChuck bucket from Red Lynch and all I did was grease 1 grease nipple and oil a chain once a week and that’s all I did for 6 years until the cows were sold ?
We had it on a JCB so you would have to check it they do it for a tractor.

Woodchuck - Sand & Sawdust dispensers

www.redlynchtractors.co.uk

 

[andrew830]

Halse sell the woodchuck machines,have a look at them,no belts just spinning disks.

 

[holywell farmer]

I have an AG 200. Bit heavy filled with sand but they do make smaller versions.

http://www.ag-products.co.uk/bedding-machine/

They look the job

 

[Wynnstay]

Mensch Sand Shooter does a good job here, heavy built and we have it on a telehandler, it weighs 3.5 ton full, but they do them for skid steers too so must fit a front loader.

Merion Thomas at Wynnstay is the man you want!

Meirion's number is 07718 773035 if you want to drop him a call.