Trailer LED woes!

[pdagriservices]

Have a grain trailer with LED lights. Have never had a problem with them since the trailer was new 6 years ago! Come to harvest preparations and the side marker lamps and right hand side tail lights have stopped working! Have gone from the tractor end wich has a socket on the trailer end and the tractor end have tried different plugs and different machines still the same have followed the wiring back can t see anything cut or chafed back to the junction box? It has one junction box have taken wires out of the bridge and joined them directly still nothing? So I m stumped now??? Everything else works perfect!! Its an 18t Bailey beetheaper in case anyone has had similar issues? Any ideas would be much appreciated
TIA
PD

 

[Rs chunk]

Silly question are you getting power at the terminal on the tractor socket

 

[Lincs Lass]

Have you checked the tractor fuses

 

[pdagriservices]

Just got it sorted guys! Took the black feed from the tractor end on the junction box out of the bridge and just joined together and it worked! So I ve just put left and right feeds into the one bridge! That did the trick! Thanks for your replys!

 

[Lincsman]

Just got it sorted guys! Took the black feed from the tractor end on the junction box out of the bridge and just joined together and it worked! So I ve just put left and right feeds into the one bridge! That did the trick! Thanks for your replys!

So all side lights on one fuse now?

 

[pdagriservices]

So all side lights on one fuse now?

Yes! Seems ok so far! I just assumed that they draw very low rampage it's not going to be an issue?

 

[principal skinner]

Right hand side tail light fuse on the tractor?

Brown wire (pin 5) bet there is now power at the plug or pin not making contact on the male plug

 

[Lincsman]

Yes! Seems ok so far! I just assumed that they draw very low rampage it's not going to be an issue?

Power wise it wont be a problem, just if there is a fault occurs it all goes dark together.

 

[pdagriservices]

Power wise it wont be a problem, just if there is a fault occurs it all goes dark together.

True! I have thought of that! Have had them running for a bit seem all ok! Sent some fuses with the trailer driver I can keep an eye on him from the combine! So fingers crossed! I ll probably get some new 7 core wire for it and replace after harvest.

 

[Mur Huwcun]

True! I have thought of that! Have had them running for a bit seem all ok! Sent some fuses with the trailer driver I can keep an eye on him from the combine! So fingers crossed! I ll probably get some new 7 core wire for it and replace after harvest.

If you’re not using the blue fog lamp cable for flashers or reversing lights then just swap over from brown to blue at the plug and at the junction box

 

[pdagriservices]

If you’re not using the blue fog lamp cable for flashers or reversing lights then just swap over from brown to blue at the plug and at the junction box

Blue one is being used for the rear LED beacon light. I think? I ll have to have a look again but good advice will look at that too when I get a chance?