Looking at putting a set of flotations on a trailer.
There’s two options:
560 45 22.5
560 60 22.5
It’s a high sided trailer so over height is important for tipping in old low sheds. The ‘45m version makes the trailer a bit lower. Any negatives between the two sizes please?
The 60 profile will be slightly bigger and easier to pull.
Personally I’d go with the 60s unless they physically won’t fit under the trailer body / mudguards.
The height difference is only 80mm if they both have the same pressure in them.
The 60 as above will roll better and take less pull in the wet.
Also more resistant to pulling off the rims at low pressures as more rubber to flex.
The 60 will also have a greater load rating at a given speed and pressure because there is more rubber and air volume in the tyre.
Location: Village Hotel Bury, Rochdale Road, Bury, BL9 7BQ
The Farming Forum has teamed up with the award winning hardware manufacturer Easy Compute to bring you an educational talk about how AI and blockchain technology is helping farmers to diversify their land.
Over the past 7 years, Easy Compute have been working with farmers, agricultural businesses, and renewable energy farms all across the UK to help turn leftover space into mini data centres. With...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.