royboy1964
Member
- Location
- Bedfordshire
I have aTrimble EZ 250, live and ground have pulled out the back of the 12 pin Deutsh connector which connects to the back of the ez250
Just would like to know out of pins 1 & 12 which is live,don't want to mix them up,
Found the Radar output pin numbers if that helps anyone,going to add that to mine at the same time and have ordered the pins from Retrofit Parts
4 External switch in
8 Ground
9 Radar out
Just would like to know out of pins 1 & 12 which is live,don't want to mix them up,
Found the Radar output pin numbers if that helps anyone,going to add that to mine at the same time and have ordered the pins from Retrofit Parts
4 External switch in
8 Ground
9 Radar out