Tru-Test Weighbars Repair

[Allied Weighing]

Please remove if this isn't allowed. Just thought it might be helpful and save money.
We can now offer a repair service for Tru-test weigh bars, the only proviso is you must have an eziweigh 5 or later indicator.

 

[Bullring]

Please remove if this isn't allowed. Just thought it might be helpful and save money.
We can now offer a repair service for Tru-test weigh bars, the only proviso is you must have an eziweigh 5 or later indicator.

Out of interest why does it have to be an eziweigh 5 or later, is it something to do with the cells?

 

[Allied Weighing]

Out of interest why does it have to be an eziweigh 5 or later, is it something to do with the cells?

Hi. The reason for ezi weigh 5 or later is that we can recalibrate to our cells no problem but the earlier versions ie ezi weigh 1 and 2
Are fixed to tru test cells.
However there is no reason we cant use our own weight display, other than this adds to the cost of the repair.
Hope this helps

 

[Bullring]

Yes just curious, I've got trutest loadbars and eziweigh 1 and 4, does that mean it won't work on newer trutest bars as I've just applied for a grant and loadbars were on my list but was hoping to get away with the older reader.

 

[Allied Weighing]

No problem if you're going to buy tru test bars. They should still work with the ezi weigh

 

[Allied Weighing]

Its only for repair purposes as our loadcells have a different output

 

[Allied Weighing]

just an update, we can offer a full repair on tru test weigh bars , replace all loadcells and recalibrate to any yellow tru test display £390

 

[davidroberts30]

I can vouch for adam at @Allied Weighing
Made some new bars for my easyweigh a few weeks ago??

 

[ploughman1963]

@Allied Weighing can you do anything with Iconix weigh bars and gauge? Set we have started playing up the other day. Alternative is to get some new bars to work with our eziweigh 7 head that we have on another unit?
Thanks

 

[Allied Weighing]

Hi, can always take a look at the iconix ones for you, the problem is getting replacement cells, there non standard, and its devil's own job to make our ones fit, but sometimes all it might be is dodgey connector or cables that need replacing,
More than happy to have a look, no charge for looking
Regards Adam

 

[ploughman1963]

Hi, can always take a look at the iconix ones for you, the problem is getting replacement cells, there non standard, and its devil's own job to make our ones fit, but sometimes all it might be is dodgey connector or cables that need replacing,
More than happy to have a look, no charge for looking
Regards Adam

Great , I’ll pm you

 

[Midlands Farmer]

Hi are you still able to fix Tru-test weigh bars? If so roughly how much would it cost?
I’ve a 1000mm set with a 5i head and one bar is not working…
Thanks, Chris

 

[Allied Weighing]

Hi chris
Yes we can repair the weigh bars, depending on what the fault is, best case scenario its a faulty connector, supply and fit £48 , worse case replace loadcell , again supply and fit £225 for 1010 size, all plus p and p.
Regards Adam

 

[Midlands Farmer]

It’s not the cable as I sent to David King and they couldn’t repair. Have you got a contact number and I’ll give you a ring. Thanks

 

[Allied Weighing]

01745 860533 or 07802 448283
Regards Adam