TS115 electric lift not working

[burt_100]

The electric lift on my TS115 has stopped working from any of the controls i.e. the lift handle, rocker switch or mudguard switches, I found a burnt earth wire on top of the gearbox and have repaired but the fault is still evident, I have replaced the ecu with a known good unit and the fault is still evident, I don't have any fault codes as the dash is not displaying lift or gear status but hasn't for a long time even before the lift stopped working, I have checked the lift height potentiometer, control panel etc and they all seam to work fine, I have checked the wiring which is all intact, is there something that I am missing?

 

[agrimax]

Are the spool valves still working?
Fuses 12 and 14 ......check.
Think relay marked IV is for linkage electrics too. Worth checking.

 

[burt_100]

All powers are there and the relay is working, spools are working fine but no command coming to solenoids on lift

 

[agrimax]

Not sure if the alternator had a direct input to the linkage controls or not but check its output too, although I'd expect the pto to not be working either........ Got to be a bad connection somewhere...

 

[burt_100]

Checked the alternator and it also works, sounds like a bad connection to me as well but there isn't any voltage coming out at the ecu either, do you know of anywhere I could get a wiring diagram or find out what inputs are required to make the lift work?

 

[agrimax]

Time for a workshop manual... Should be a wiring diagram in there....

 

[burt_100]

any idea where I would get a copy of the workshop manual

 

[agrimax]

Thought that would have been an easy one to get tbh, but looking about online, there's nothing. Strange...

 

[7610 super q]

Can't be too dissimilar to the 40 series ? A few of these manuals on ebay ?

 

[burt_100]

I have one for the 40 series but it is really unclear