TX63 Self leveling sieve help

[Somerset Farmer]

The self leveling warning light is on most of the time and the sieves are not moving from tilt and error code 205 is showing. Can i disconect the motor from its main supply and use a slave battery to move the sieves to level(as long as the motor is good) and then continue combining with the motor disconnected or will I damage the self leveling electrics. I will be combining fairly level from now on. Has anyone done this and did it work.
TIA

 

[Fergieman]

Yes have done this before on a TX68. It was the levelling box on ours that went wrong.

 

[Brains]

When they get to a certain age, simplest thing to do is to take actuator off and bolt in a steel bar.
I did replace the relays in the leveling box circuit board and never had no more bother, thought I had nout to loose. Just got relays from RS and a steady hand with soldering iron.

 

[Gone Shooting]

Took mine apart a few years ago cleaned up and way to go - replaced the next season with one off ebay.

 

[bravheart]

Try the simple first ie. yes run wires to the motor from a battery and see if it works connected either way. If it does on a 30 series the sensor is a tilt switch behind the front axle/gearbox sometimes it can stick and need a shock from a hammer to get it working again