Take the springs off that hold the rollers together so you can tell what roller is sticking. From memory the steel roller has the one way bearings in it (so the brake bar doesn’t pull the net back through) and these were the ones that gave trouble but maybe only one or two out of 30-40 balers I serviced.Just got a Welger RP445, just getting it ready to use, but having trouble threading the net wrap through final 2 rollers (rubber & steel) rollers won't move and have an error on the elink box. Any ideas?
Thanks that sorted itTake the springs off that hold the rollers together so you can tell what roller is sticking. From memory the steel roller has the one way bearings in it (so the brake bar doesn’t pull the net back through) and these were the ones that gave trouble but maybe only one or two out of 30-40 balers I serviced.