Replacing oil seals on my cutter deck. One seal was completely destroyed and the shaft corroded.
The new seal seems to be a very slack fit so I'm thinking it's either the wrong size or the shaft is worn.
The shaft measures 31.6mm dia and the seal is a 34mm. Also wondering if the shaft is actually 1.25" and not metric, so it should be 31.75mm and the seals I got are wrong.
Anyone replaced the oilseals on one of these? What size seals did you use?
The new seal seems to be a very slack fit so I'm thinking it's either the wrong size or the shaft is worn.
The shaft measures 31.6mm dia and the seal is a 34mm. Also wondering if the shaft is actually 1.25" and not metric, so it should be 31.75mm and the seals I got are wrong.
Anyone replaced the oilseals on one of these? What size seals did you use?
