Whats this plug called

[Dman2]

Anyone know what this type of plug is called
Inside is corroding on this, and can`t get anything in to clean the sockets.
Off the light module on an Arion

 

[DrDunc]

ZIF connectors (zero input force) will replace them, but sorry don't know name of the "much more expensive" ones with the cam lever connector

 

[Dry Rot]

Electronic switch cleaner? It eats switch corrosion. (Not WD40).

 

[YELROM]

As above get an aerosol of contact cleaner and blast out any muck and corrosion

 

[Dman2]

Tried switch cleaner.
Think it may be to far gone.
When we bought this tractor 5 yrs ago had to replace light control unit as it was to badly corroded to repair, cleaned plug best we have been able to and is generally ok but keeps throwing up an error code.
I can force the error code by waggling plug about
Beginning to think a new plug may be the answer, or just solder the wires direct onto the board

 

[Deutz631]

https://uk.farnell.com/te-connectiv...gf-yellow/dp/3134153?pf_custSiteRedirect=true

normally you can pull off the black tab at the back and slide the pin rail out. The yellow is just a cover. You can then depin the rail , crimp new connectors on the cables , put the new pins in the rail and slide the rail back in the yellow cover. You really just need new pins and patience

 

[Dry Rot]

Anyone tried searching on images? Didn't work this time but might with a better image. Copy image and paste in Google. Never tried this before. Wrong -- but impressive! Deutz631 got it.

 

[Nearly]

https://uk.farnell.com/te-connectiv...gf-yellow/dp/3134153?pf_custSiteRedirect=true

normally you can pull off the black tab at the back and slide the pin rail out. The yellow is just a cover. You can then depin the rail , crimp new connectors on the cables , put the new pins in the rail and slide the rail back in the yellow cover. You really just need new pins and patience

Looks expensive though.
Great find.