Where to source Slurry suction pipe fittings

[snarling bee]

I am new to the livestock game. Where do I source a 6 inch galvanised 90 degree bend for our suction hose?
Thanks in advance.

 

[RAF]

Spaldings

 

[Fergieman]

To join 2 bits of pipe or straight onto tanker?

 

[Fergieman]

Have a look here.

Slurry & Muck Spreader Parts - KRAMP

Discover Slurry & Muck Spreader Parts at KRAMP. You can find the largest range of Slurry & Muck Spreader Parts products online. It's that easy!

www.kramp.com

 

[FarmerFrank88]

We buy slurry pipe and bits from boosta. They're the cheapest and best place we've found so far

 

[sjt01]

We go to Kiowa for hose, bauer fittings and similar. Good service, helpful staff on sales phone, able to source something different - my latest was a hose assembly safe for concentrated sulphuric acid (for reducing slurry ammonia loss).

 

[snarling bee]

The current hose (less than 12 months old) is cracking where it hangs over the opening of the underground tank. We need to make it a bit more robust and permanent.

 

[Agrispeed]

Kramp fittings are better than sparex in my experience.

If you are using flange joints for suction, make sure they have O-rings or are flat faced and possibly even use some silicone or caulk to get a decent seal. We had an adapter that squirted slurry from the joint when the vacuum was cut - The drivers were not impressed!