How much did the metal worker fetch?
Cheap!!!!
How much did the metal worker fetch?
Er??@Dave W how thick a bit of steel would your press be able to bend ? Would it be feasible to get about a 15 degree bend in a 30 mm X 45 flat bar ?
Yes I think it was. Would have cleaned up real nice.Cheap!!!!
Are you familiar with 600 series mf pick up hitch?Er??
Would probably do it. I think it all would depend how tight you wanted the bend. Would be more of a curve I think.
What's the project
Vaguely.Are you familiar with 600 series mf pick up hitch?
The two bits that stop trailer jumping off, I need two, they are £150 each
I can buy a 20 t press for £125
Are you familiar with 600 series mf pick up hitch?
The two bits that stop trailer jumping off, I need two, they are £150 each
I can buy a 20 t press for £125
That's it, the bit either side of the hook, you think it would be possible to get them made?
Like this?View attachment 413370
Yes that should be a doddle for the right man. Most engineers shops should be able to sort that.That's it, the bit either side of the hook, you think it would be possible to get them made?
Yes bolted onYes that should be a doddle for the right man. Most engineers shops should be able to sort that.
Are they bolted on?
Don't suppose you have a pattern?Yes bolted on
I could borrow one for a few daysDon't suppose you have a pattern?
Is it fitted with a steel cut of blade or is that one for wood
thanks just seen lower down price was mentioned and thanks for replyFound at car boot sale this morning ,,bit pricey but a genuine recordView attachment 410818
I'll see if I can find some steel the right size and have a trial runI could borrow one for a few days
That was cheap as long as it's in good order. I saw a 55 ton Kingsland one sell for £1700 earlier this year and that's a 100 ton model.
Nah!