- Location
- Larne, Northern Ireland
Don't see many with that cabLoved my old 5455,View attachment 437494View attachment 437498
Don't see many with that cabLoved my old 5455,View attachment 437494View attachment 437498
She was the low profile cab for going in poly tunnels. I used to pull all the beds for the strawberries and raspberries. it was a squeeze even with that can.Don't see many with that cab
It looks a real good job, standard cab versions can be very high, which on a loader tractor isn't greatShe was the low profile cab for going in poly tunnels. I used to pull all the beds for the strawberries and raspberries. it was a squeeze even with that can.
Put 4500 hours on her in just over 3 year with no problems what so ever.
Well if want Massey v jd if be 6910 v 6290That's a far more modern and more complicated tractor so not really a fair comparison
What power is the ValtraHad a 6300 too one of the first, was dead compared to the 2850 Christmas cake depth control was made of chocolate, the front window leaked as did the sunroof and the side exhaust burst here and there sending fumes into the cab. 4f M950 Vogel and Noot plough did for the rear rock shaft. Sold it age 10 very glad to see it go gearbox was heading south at 7000hrs and I never did like that right hand shuttle on the consul bought a 6750 Valtra which has been pretty good apart from the turbo spewing into the intercooler and bursting steel pipes on the spool block. Equivalent Massey would be a 3075, never drove one of those but spent a year on a 3070 Datatronic which was not a bad tractor but at only 3 years old was starting to rust quite badly around the cab, place had a 3065 loader which wasn't great gearbox mainly from memory and felt more than 8hp less than the 3070.
Cheers BB
Wouldn't even be worth the Massey driver starting the engine!Well if want Massey v jd if be 6910 v 6290
Farmers are skint, don't you know?I couldn't believe he scrapes out with a TS90!!! I mean, surely he's abit over powered for job
50hp is what you needFarmers are skint, don't you know?
This months issue a good. 1It depends how big the scraper is...
I'm no longer subscribed. It got a bit sameyThis months issue a good. 1
Been fan of it since 2008I'm no longer subscribed. It got a bit samey
That said, I might go and pick it up
Which month?Been fan of it since 2008
JanuaryWhich month?