ACEngineering
Member
- Location
- Oxon
Could you ring Strimech direct to see if they can answer as to what size it is or what they use to do the job?
Yeah I guess I could
Could you ring Strimech direct to see if they can answer as to what size it is or what they use to do the job?
2 13/64ths
Nobody in their right mind would know that!
I dispute your post and cannot believe that such a measurement has ever existed. Nobody has ever made a socket of that size, not even the Welsh.
Got to buy a large socket to undo the main pivot bolt on a Strimech shear grab.
Got to be a socket no spanner or stilsons will get near it, I measured the nut as being just over 56mm some thing like 56.3 or 56.4mm? (digital veneers so should be accurate)
Would they have used a imperial bolt???? what size imperial socket is near that?
biggest socket I got is 51mm so no were near!
Need to take the top grab off to do a little repair
Def 2"1/4 inch
And as for a 2 13/16 that would be 71mm approx, as for odd sizes try figuring out whitworth..........................
Tinternet conversion chart
Are there no depths of skullduggery to which you will plunge to firmly assert your undisputed mastery of metric to imperial measurements?
I have met some utterly ruthless people in my life, but none so devious and so unscrupulously underhanded as yourself Lincs Lass.
Have you ever considered a career in the civil service, or even the Welsh Assembly?
You'll sleep well tonight then ACE
Folkstone fixings New 57mm impact socket 3/4 drive £27.60 inc vat and 1st class post Think that will do me
Or cut it offMost self respecting farmers I know would have knocked it around with a chisel.