Philip Watkins
Member
- Location
- Back in Shropshire
Some of us didApologiesI thought some people may find it interesting
Today at work
- Thread starter Penmoel
- Start date
Landyman
New Member
It comes out of my food allowance . Oh hang on ,the butty cost me nothing so thats £15 in my pocket
- Location
- Welshpool Powys
- Location
- North West
[emoji23] it dose get used for running the dryer but it's loader days are over.
smcapstick
Member
- Location
- Kirkby Lonsdale
'It was serviced in Spring'
- Location
- Welshpool Powys
Spring 2001?
markpentre
Member
- Location
- wrexham
- Location
- South wales
Tomtrac
Member
- Location
- Penrith cumbria
It looks like you are loading with an auger
What size is auger
and how long to do 28-30ton
Farmerdunk
Member
- Location
- Hertfordshire
Got our portable weighbridge up and running. All we now need now is some sunshine!
smcapstick
Member
- Location
- Kirkby Lonsdale
Whenever it was, the owner must've 'bulked out' his fuel with soil!
- Location
- South wales
Good weghbrige that is we have one
- Location
- North West
6" normally takes around 40-50 min for 30ton depending on bushel weight. Augers getting a bit worn on the bottom section which doesn't help.
- Location
- the brecks norfolk
Sprayed some of the beet this evening.
Farmerdunk
Member
- Location
- Hertfordshire
Good weghbrige that is we have one
Do you get recalibrated each year? Does it match up with the combine yields?
They (Griffiths elder) told us that 1% difference is good.
- Location
- South wales
We / my boss spoke with somone at Griffith elder who talked him through the recalibration process, we use ours mostly for weighing maize and silage so not sure on the yield matching sorry, however we tested each plate with a bag of fert and there was nothing in it between the sides, also ran a trailer over that had been weighed at a "proper" tested weghbridge and again there was hardly a difference